Lubi Industries Llp
Ahmedabad, Gujarat
GST No. 24AAEFL7190C2ZH
08048970446 91% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- New Items
| Brand | LUBI |
| Head | to 2.4 bar (22 metres of head) |
| Model Name/Number | LDP |
| Temperature | to +88 DegreeC (+190 DegreeF) |
| Brand | LUBI |
| Usage/Application | Water supply - Irrigation - Civil - Industrial - Fire fighting" |
| Type | Water Filled |
| Country of Origin | Made in India |
*Your information is safe with us.
| Usage/Application | - General Water Applications. - Fire Applications. |
| Size | - Suction Diffuser Size : 2.5", 3", 4", 5", 6" 8", 10", 12". |
| Country of Origin | Made in India |
| Features & Benefits | Available in PN 16 & PN 25 as per DIN standard EN 1092-2, with flanged connections. |
| Features & Benefits | Flanges with ANSI 125 & ANSI 250 are available as per ASME B16.1. |
| Features & Benefits | Available with equal or reduced outlet flanges. |
| Features & Benefits | Cast on supporting pads for convenient mounting of standard I.D support foot. |
| Features & Benefits | Drain/purge plugs is used to drain the suction diffuser when required. |
| Features & Benefits | It has an in-built magnet to trap small metallic particles. |
| Features & Benefits | Available suction gauge port. |
| Features & Benefits | 'O' ring seals body cover. |
| Features & Benefits | Quick opening bolted body cover minimize down time while cleaning the strainer. |
The Lubi LSD Suction Diffuser is a device which directly mounts to the suction side of horizontal or vertical centrifugal pumps.
| - Valve Size (mm) : | 25, 40, 50, 65, 80, 100 |
| - Hydrostatic Shell Test : | 30 bar (435 psi) |
| - Seat Test Pressure : | 22 bar (319 psi) |
| - Maximum Working Pressure : | 20 bar (290 psi) |
| Applications | - General Water Utility- HVAC- Industrial- Oil & Gas- Water Treatment- Waste-Water Plants |
| Features & Benefits | the ball tightly butts with the metal seat which controls any leakage. |
| Brand | lubi |
| Model Name/Number | Horizontal split case pumps (LHC series) |
| Country of Origin | Made in India |
| About :The LHC series are horizontal, single or double stage, centrifugal, split case pumps. |
| Applications :• The pump shall be designed for clean liquids which are non-aggressive and non-explosive, without any solids or fibers. • Water Supply. • Pressure boosting for high rise buildings, hotels, industry etc. • Industrial washing & cleaning systems. • Fire Protection systems. • Cooling & Air Conditioning systems. • Boiler feed and condensate transfer system. • Irrigation systems for fields including sprinkler & drip irrigation systems. |
*Your information is safe with us.
| Brand | LUBI |
| Model Name/Number | Horizontal multistage centrifugal pumps (MH series) |
| Country of Origin | Made in India |
| About :The MH series are cost competitive, horizontal, multistage, non-self priming, close coupled , centrifugal pumps. |
| Usage/Application | Cooling & heating systems Pressure boosting systems Industrial applications Water supply Fire p |
| Brand | Lubi |
| Model Name/Number | Packaged HVAC Pumping System |
| Country of Origin | Made in India |
| - Valve Size : | 2-1/2", 3", 4", 6", 8" & 10". |
| - Test Pressure (Hydrostatic Shell) : | 20.5 bar (300 psi). |
| - Maximum Working Pressure : | 17 bar (250 psi |
| - Maximum Working Temperature: | 50 DegreeC (122 DegreeF) |
| Applications | general utility water applications as well as HVAC applications.- Fire Applications. |
| Features & Benefits | - OS & Y means Outside Stem & Yoke nut mechanism is used to operate the Gate Valve. |
| Features & Benefits | - The valve is very easy to operate using just a Hand Wheel. |
| Features & Benefits | - We provide Drain plugs for draining the valve for maintenance purpose. |
| Features & Benefits | - We design all our OS & Y Gate Valves as per the safety standards certifying to: |
| Features & Benefits | i.NSF / ANSI 61 ii.NSF / ANSI 372 |
| Features & Benefits | - We provide Flanged Ends as per the ANSI B16.1 CLASS 125 |
*Your information is safe with us.
| - Valve Size : | 2-1/2", 3", 4", 6", 8" & 10". |
| - Test Pressure (Hydrostatic Shell) : | 20.5 bar (300 psi). |
| - Maximum Working Pressure : | 17 bar (250 psi). |
| - Maximum Working Temperature: | 50 DegreeC (122 DegreeF) |
| Applications | general utility water applications as well as HVAC applications. - Fire Applications. |
| Features & Benefits | - As the name suggests, these valves have Non-Rising Stem. |
| Features & Benefits | - As the stem is Non-Rising, it is suitable where limited Installation space is available. |
| Features & Benefits | - We provide Drain plugs for draining the valve during maintenance. |
| Features & Benefits | - We provide Flanged Ends as per following standards:i.PN10 ii.PN16iii.ANSI BS 16.1 Class 125 |
| - Maximum Working Pressure : | PN10 - 10 bar (145 psi), PN16 - 16 bar (232.0 psi) |
| - Maximum Working Temperature: | 110 DegreeC (230 DegreeF) |
| Applications | - Full vacuum - Aeration and blower applications. |
| Features & Benefits | - Butterfly Valves are easy to open & close. |
| - Valve Size : | 50, 65, 80, 100, 125, 150, 200, 250, 300. |
| - Test Pressure (Hydrostatic Shell) : | PN10 - 15 bar (217.5 psi), PN16 - 24 bar (348.0 psi) |
| - Valve Size (mm) | 25, 40, 50, 65, 80, 100, 150, 200 |
| - Hydrostatic Shell Test : | 30 bar (435 psi) |
| - Seat Test Pressure : | 22 bar (319 psi) |
| - Maximum Working Pressure : | 20 bar (290 psi) |
| Applications | - General Water Utility- HVAC- Industrial- Oil & Gas- Water Treatment- Waste-Water Plants |
| Features & Benefits | - It is suitable where simple open/shut application is needed. |
| Features & Benefits | - Flow Rate can also be controlled by partially opening or closing the valve to various degrees. |
*Your information is safe with us.
| - Strainer Size : | 2", 2-1/2", 3", 4", 6", 8", 10 & 12". |
| - Test Pressure (Hydrostatic Shell) : | 24 bar (350 psi). |
| - Maximum Working Pressure : | 16 bar (230 psi). |
| - Maximum Working Temperature: | 90* C |
| Applications | general utility water applications as well as HVAC applications.- Fire Applications. |
| Features & Benefits | - We provide Flanges as per the following standards: I.PN10 II.PN16 III.BS10 Table F IV.ANSI 150 - |
| Features & Benefits | - It is particularly beneficial to filter / strain out particles from flowing liquid. |
| Features & Benefits | - They are useful anywhere clean liquid flow is required. |
| Features & Benefits | - We have increased the screen area of the mesh to achieve greater performance efficiency. |
| Features & Benefits | - Y - Strainers are suitable for clean water only. |
| - Strainer Size : | 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3". |
| - Test Pressure (Hydrostatic Shell) : | 24 bar (350 psi). |
| - Maximum Working Pressure : | 16 bar (230 psi). |
| - Maximum Working Temperature: | 90 Degree C |
| Applications | general utility water applications as well as HVAC applications.- Fire Applications. |
| Features & Benefits | - We provide Flanges as per the following standards: I. BSP Standard II. NPT - (optional) |
| Features & Benefits | - It is particularly beneficial to filter / strain out particles from flowing liquid. |
| Features & Benefits | - They are useful anywhere clean liquid flow is required. |
| Features & Benefits | - We have increased the screen area of the mesh to achieve greater performance efficiency. |
| Features & Benefits | - Y - Strainers are suitable for clean water only. |
| - Strainer Size : | 2", 2-1/2", 3", 4", 6", 8", 10 & 12". |
| - Test Pressure (Hydrostatic Shell) : | 24 bar (350 psi). |
| - Maximum Working Pressure : | 16 bar (230 psi). |
| - Maximum Working Temperature: | 90* C |
| Applications | general utility water applications as well as HVAC applications.- Fire Applications. |
| Features & Benefits | - We provide Flanges as per the following standards: I.PN10 II.PN16 III.BS10 Table F IV.ANSI 150 |
| Features & Benefits | - It is particularly beneficial to filter / strain out particles from flowing liquid. |
| Features & Benefits | - They are useful anywhere clean liquid flow is required. |
| Features & Benefits | - We have increased the screen area of the mesh to achieve greater performance efficiency. |
| Features & Benefits | - Y - Strainers are suitable for clean water only. |
*Your information is safe with us.
| - Strainer Size : | 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3". |
| - Test Pressure (Hydrostatic Shell) : | 24 bar (350 psi). |
| - Maximum Working Pressure : | 16 bar (230 psi). |
| - Maximum Working Temperature: | 90 Degree C |
| Applications | general utility water applications as well as HVAC applications. - Fire Applications. |
| Features & Benefits | - Y - Strainers are suitable for clean water only. |
| - Valve Size : | 2", 2-1/2", 3", 4", 6", 8" & 10". |
| - Test Pressure (Hydrostatic Shell) : | 20.5 bar (300 psi). |
| - Maximum Working Pressure : | 17 bar (250 psi). |
| - Maximum Working Temperature: | 50 DegreeC (122 DegreeF) |
| Applications | general utility water applications as well as HVAC applications. - Fire Applications. |
| Features & Benefits | - We design Swing Check Valves mainly to prevent back-flow in the pipeline. |
| Features & Benefits | - No external power source required as these valves are guided by direction of fluid flow. |
| Features & Benefits | Allows flow of liquid in only one direction.-Pressure Drop & Turbulence in these valves are very low |
| Features & Benefits | - We provide Drain plugs for draining the valve during maintenance. |
| Features & Benefits | - These Valves can be installed horizontally as well as vertically. |
| Features & Benefits | - We provide Grooved Ends as per the following standard: i. AWWA C606 Standard |
| - Valve Size : | 2", 2-1/2", 3", 4", 6", 8" & 10". |
| - Test Pressure (Hydrostatic Shell) : | 20.5 bar (300 psi) |
| - Maximum Working Pressure : | 17 bar (250 psi). |
| - Maximum Working Temperature: | 50 DegreeC (122 DegreeF) |
| Applications | general utility water applications as well as HVAC applications. |
| Features & Benefits | - We design Swing Check Valves mainly to prevent back-flow in the pipeline. |
| Features & Benefits | - No external power source required as these valves are guided by direction of fluid flow. |
| Features & Benefits | Allows flow of liquid in only one direction.-Pressure Drop & Turbulence in these valves are very low |
| Features & Benefits | - We provide Drain plugs for draining the valve for maintenance purpose. |
| Features & Benefits | - These Valves can be installed horizontally as well as vertically. |
| Features & Benefits | - We provide Flanged Ends as per the following standard: i.PN10 ii.PN16 iii.ANSI BS 16.1 Class 125 |
*Your information is safe with us.
| - Valve Size : | 2", 2-1/2", 3", 4", 6", 8" & 10". |
| - Test Pressure (Hydrostatic Shell) : | 20.5 bar (300 psi). |
| - Maximum Working Pressure : | 17 bar (250 psi). |
| - Maximum Working Temperature: | 50 DegreeC (122 DegreeF) |
| Applications | general utility water applications as well as HVAC applications.- Fire Applications. |
| Features & Benefits | - We design Swing Check Valves mainly to prevent back-flow in the pipeline. |
| Features & Benefits | - No external power source required as these valves are guided by direction of fluid flow. |
| Features & Benefits | Allows flow of liquid in only one direction.-Pressure Drop & Turbulence in these valves are very low |
| Features & Benefits | - We provide Drain plugs for draining the valve during maintenance. |
| Features & Benefits | - These Valves can be installed horizontally as well as vertically. |
| Features & Benefits | - We provide Grooved Ends as per the following standard: i. AWWA C606 Standard |
| - Valve Size : | 2", 2-1/2", 3", 4", 6", 8" & 10". |
| - Test Pressure (Hydrostatic Shell) : | 20.5 bar (300 psi) |
| - Maximum Working Pressure : | 17 bar (250 psi). |
| - Maximum Working Temperature: | 50 DegreeC (122 DegreeF) |
| Applications | general utility water applications as well as HVAC applications. |
| Features & Benefits | - We design Swing Check Valves mainly to prevent back-flow in the pipeline. |
| Features & Benefits | - No external power source required as these valves are guided by direction of fluid flow. |
| Features & Benefits | Allows flow of liquid in only one direction.-Pressure Drop & Turbulence in these valves are very low |
| Features & Benefits | - We provide Drain plugs for draining the valve for maintenance purpose. |
| Features & Benefits | - These Valves can be installed horizontally as well as vertically. |
| Features & Benefits | - We provide Flanged Ends as per the following standard: i.PN10 ii.PN16 iii.ANSI BS 16.1 Class 125 |
| - Valve Size : | 50, 65, 80, 100, 125, 150, 200, 250, 300. |
| - Working temperature: | 18 DegreeC to 80 DegreeC. |
| - Pressure Rating : | Hydrostatic Shell Test Presssure : 24.5 bar (300 psi). |
| Seat Test Pressure: | 16 bar (230 psi). |
| Applications | HVAC Systems HPM Systems |
| Features & Benefits | - We have designed these valves as per API 594 standard. |
| Features & Benefits | - Nitrile Rubber Seat lining improves & gives long lasting life. |
| Features & Benefits | - More compact and occupies less space due to Wafer-type design. |
| Features & Benefits | - Due to spring assisted closure, water hammer effect is almost non-existent. |
| Features & Benefits | Valve End Connections are suitable for the following flange standards: |
| Features & Benefits | I.PN6 II.PN10 III.PN16 IV.ANSI B Class-125 |
| Features & Benefits | - Suitable for clean water only. |
*Your information is safe with us.
| - Valve Size : | 50, 65, 80, 100, 125, 150, 200, 250, 300. |
| - Working temperature: | 18 DegreeC to 80 DegreeC. |
| - Pressure Rating : | Hydrostatic Shell Test Presssure : 24.5 bar (300 psi). |
| Seat Test Pressure: | 16 bar (230 psi). |
| Applications | Fire Systems |
| Features & Benefits | - We have designed these valves as per API 594 standard. |
| Features & Benefits | - Nitrile Rubber Seat lining improves & gives long lasting life. |
| Features & Benefits | - More compact and occupies less space due to Wafer-type design. |
| Features & Benefits | - Due to spring assisted closure, water hammer effect is almost non-existent. |
| Features & Benefits | - Valve End Connections are suitable for the following flange standards: |
| Features & Benefits | I.PN6 II.PN10 III.PN16 IV.ANSI B Class-125 |
| Features & Benefits | - Suitable for clean water only. |
| - Valve Size : | 2-1/2", 3", 4", 6", 8" & 10". |
| - Test Pressure (Hydrostatic Shell) : | 20.5 bar (300 psi). |
| - Maximum Working Pressure : | 17 bar (250 psi). |
| - Maximum Working Temperature: | 50 DegreeC (122 DegreeF) |
| Applications | general utility water applications as well as HVAC applications.- Fire Applications. |
| Features & Benefits | - We provide Grooved Ends as per following standards : i. AWWA C606 Standard. |
| - Valve Size : | 2-1/2", 3", 4", 6", 8" & 10". |
| - Test Pressure (Hydrostatic Shell) : | 20.5 bar (300 psi). |
| - Maximum Working Pressure : | 17 bar (250 psi). |
| - Maximum Working Temperature: | 50 DegreeC (122 DegreeF) |
| Applications | general utility water applications as well as HVAC applications. - Fire Applications. |
| Features & Benefits | - We provide Flanged Ends as per following standards:i.PN10 ii.PN16 iii.ANSI BS 16.1 Class 125 |
*Your information is safe with us.
| - Valve Size : | 2-1/2", 3", 4", 6", 8" & 10". |
| - Test Pressure (Hydrostatic Shell) : | 20.5 bar (300 psi). |
| - Maximum Working Pressure : | 17 bar (250 psi). |
| - Maximum Working Temperature: | 50 DegreeC (122 DegreeF) |
| Applications | general utility water applications as well as HVAC applications. - Fire Applications. |
| Features & Benefits | - OS & Y means Outside Stem & Yoke nut mechanism is used to operate the Gate Valve. |
| Features & Benefits | - The valve is very easy to operate using just a Hand Wheel. |
| Features & Benefits | - We provide Drain plugs for draining the valve for maintenance purpose. |
| Features & Benefits | - We provide Grooved Ends as per the following standards : i.AWWA C606 Standard |
| - Valve Size : | 2-1/2", 3", 4", 6", 8" & 10". |
| - Test Pressure (Hydrostatic Shell) : | 20.5 bar (300 psi). |
| - Maximum Working Pressure : | 17 bar (250 psi). |
| - Maximum Working Temperature: | 50 DegreeC (122 DegreeF) |
| Applications | general utility water applications as well as HVAC applications. - Fire Applications. |
| Features & Benefits | - As the name suggests, these valves have Non-Rising Stem. |
| Features & Benefits | - As the stem is Non-Rising, it is suitable where limited Installation space is available. |
| Features & Benefits | - We provide Drain plugs for draining the valve during maintenance. |
| Features & Benefits | - We provide Grooved Ends as per following standards : i. AWWA C606 Standard. |
| Valve Size : | 2-1/2", 3", 4", 6", 8" & 10". |
| - Test Pressure (Hydrostatic Shell) : | 20.5 bar (300 psi). |
| - Maximum Working Pressure : | 17 bar (250 psi). |
| - Maximum Working Temperature: | 50 DegreeC (122 DegreeF) |
| Applications | general utility water applications as well as HVAC applications. - Fire Applications. |
| Features & Benefits | - OS & Y means Outside Stem & Yoke nut mechanism is used to operate the Gate Valve. |
| Features & Benefits | - The valve is very easy to operate using just a Hand Wheel. |
| Features & Benefits | - We provide Drain plugs for draining the valve for maintenance purpose. |
| Features & Benefits | - We provide Grooved Ends as per the following standards : i.AWWA C606 Standard |
*Your information is safe with us.
| Country of Origin | Made in India |
| size | Valve Size : 50, 65, 80, 100, 125, 150, 200, 250, 300 |
| Test Pressure (Hydrostatic Shell) | PN10 - 15 bar (217.5 psi), PN16 - 24 bar (348.0 psi) |
| - Maximum Working Pressure : | PN10 - 10 bar (145 psi), PN16 - 16 bar (232.0 psi) |
| Maximum Working Temperature | 110 DegreeC (230 DegreeF) |
| Applications | - Municipal chlorinated water systems - Full vacuum - Aeration and blower applications. |
| Features & Benefits | - These valves have very less pressure drop & high pressure recovery. |
| - Valve Size : | 25, 40, 50. |
| Hydrostatic Shell Test | : 24 bar |
| Hydrostatic Seat Test : | 17.6 bar |
| Max. Workinig Pressure : | 16 bar @ ambient temp. |
| Max. Workinig Pressure : | 13 bar @ 220 DegreeC (Steam) |
| Applications | Water, Steam |
| Features & Benefits | - Straight Pattern - Bolted - Bonnet - Seat Type : Renewable Seat |
| Features & Benefits | - Disc Type : Renewable Disc - Design Standards : BS 5153. - Flanged Ends : BS 4504 (PN 16) |
| Features & Benefits | - Flange Facing : Raised face smooth finish* - Maximum Working Temperature = 220 DegreeC |
| - Suction Diffuser Size : | 2.5", 3", 4", 5", 6" 8", 10", 12". |
| Applications | general utility water applications as well as HVAC applications. - Fire Applications. |
| Features & Benefits | - Available in PN 16 & PN 25 as per DIN standard EN 1092-2, with flanged connections. |
| Features & Benefits | Flanges with ANSI 125 & ANSI 250 are available as per ASME B16.1. |
| Features & Benefits | Grooved end flanged connections are available on request. |
| Features & Benefits | - Available with equal or reduced outlet flanges. |
| Features & Benefits | - Cast on supporting pads for convenient mounting of standard I.D support foot. |
| Features & Benefits | - Drain/purge plugs is used to drain the suction diffuser when required. |
| Features & Benefits | It has an in-built magnet to trap small metallic particles. |
| Features & Benefits | - Available suction gauge port. |
| Features & Benefits | - 'O' ring seals body cover. |
| Features & Benefits | - Quick opening bolted body cover minimize down time while cleaning the strainer. |
*Your information is safe with us.
| - Valve Size : | 3-4" |
| Applications | Water Supply ,Fire Fighting ,HVAC |
| Features & Benefits | - Single body incorporates both features within one valve |
| Features & Benefits | - More compact and economical |
| Features & Benefits | - Dual body consists of two independent valves |
| Features & Benefits | - Allows individual maintenance while still protecting the pipeline |
| Features & Benefits | -Wider range of sizing options |
| Features & Benefits | - Inlets and outlets are equal to full nominal size |
| Features & Benefits | - Unconditionally guaranteed stainless steel floats |
| Features & Benefits | - Stainless steel 316 internal trim |
| Features & Benefits | - Non-clog design eliminates backwashing |
| Features & Benefits | - Exclusive high/low pressure resilient seating |
| - Valve Size : | 25, 40, 50 |
| Hydrostatic Shell Test | 24 bar |
| Hydrostatic Seat Test | 17.6 bar |
| Hydrostatic Backseat Test : | 17.6 bar |
| Max. Workinig Pressure : | 16 bar @ ambient temp. |
| Max. Workinig Pressure : | 13 bar @ 220 DegreeC (Steam) |
| Applications | Water, Steam |
| Features & Benefits | - Straight Pattern - Bolted - Bonnet - OS&Y (Outside Screw & Yoke) Type |
| Features & Benefits | - Rising Stem - Seat Type : Renewable Seat - Disc Type : Renewable Disc |
| Features & Benefits | - Design Standard : BS 5152 - Flanged Ends : BS 4504 (PN 16) |
| Features & Benefits | - Flange Facing : Raised face smooth finish* - Maximum Working Temperature = 220 DegreeC |
| Brand | LUBI |
*Your information is safe with us.