Submersible pump

Product Details:

The Lubi J & W series Stainless steel submersible pumps are designed for 4" (DN 100 mm), 6" (DN 150 mm), 8" (DN 200mm) and 10" (DN 250 mm) bore well pumps applications.

Pumped Liquids:

• Pumps are designed for pumping clear and cold water that is free of air and gasses, thin, non-aggressive and non-explosive liquids without solid particles or fibers.
• Decreased pump performance and life expectancy can occur if the water is not cold and clear or contains air and/or gasses.
• The maximum sand content of the water must not exceed 50 g/m³. Higher sand content will increase the risk of blockage and reduce the pump life.
• When pumping liquids with a density higher than that of water, motors with correspondingly higher outputs must be used.

Applications:

• Water supply
• Irrigation
• Civil
• Industrial
• Fire fighting

Features And Benefits:

• All pumps feature complete fabricated stainless steel AISI 304 construction.
• All pumps are equipped with water lubricated rubber wear rings and bush bearings to work well with sand, found in well water.
• These pumps offers higher pumping efficiency due to state-of the-art computerized hydraulic design and usage of stainless steel sheet metal which offers a very low co-efficient of friction. This significantly reduces energy consumption.
• These pump can withstand harsh, abrasive and corrosive environment due to their construction in high grade AISI 304 stainless steel.
• All pumps are equipped with reliable non-return valve to prevent back flow and reduces water hammer when the pump is stopped.
• Insulation Class is F (Oil filled motors)

Direction of Rotation:

• Clockwise as seen from the pump coupling side.

Product Details:

Cast Iron submersible Pump are made out of premium quality of raw material to ensure that pump is energy efficient, reliable and has a very long life. All components are manufactured as per international standard. All pumps are equipped with a reliable non- return valve to reduce water hammer & friction losses. Cast Iron Submersible Pumps are available from 4” to 10 “


Applications:

• Water supply
• Irrigation
• Civil
• Industrial
• Fire fighting

Features:

• All pumps have been designed using computational fluid dynamics to ensure maximum efficiency.
• All pumps are designed using material which can work with sand found in the borewell.
• All journal bearing and impeller wear rings are made of nitrile rubber to ensure that performance of pumps remain the same over a period of time.
• On all bronze impeller are available in stainless steel to provide high abrasion resistance to sand found in borewell.
• All pumps are provided with upthrust bearing to control axial movement of the impeller assembly during transportation as well as start-up.
• Low friction non-return valve is provided on all pumps to reduce water hammer when the pump is stopped.
• All Impellers are individually balanced to G 6.3 of ISO.
• The entire shaft is protected by stainless steel which can be easily replaced when they wear out during maintenance.
• All components are machined using state of the art CNC machines to ensure high dimensional accuracy which gives a longer life to the pump.

Direction of rotation:

• Clockwise as seen from the pump coupling side.

Product Details:

Lubi manufactures wide range of 60Hz Noryl Submersible Pump with the help of innovative technology and latest CNC machines. Lubi produces reliable and quality products. These water pump and motor are as per international standard like CE. The Submersible pump range is manufactured in different type of materials and thus is divided in different types which are Stainless Steel Submersible Pump, Cast Iron Submersible Pump, Noryl Submersible pump. Lubi offers Noryl pump in 4” for 60 hz. High operating efficiencies of Noryl pumpset result into high water discharge rate and lower power consumption. The pump sets are compact and slim & can be easily installed in narrow wells.

Application:

• Water supply
• Irrigation
• Civil
• Industrial
• Fire fighting

Features:

• All pumps have been designed using computational fluid dynamics to ensure maximum efficiency.
• All pumps are designed using material which can work with sand found in the borewell.
• All journal bearing and impeller wear rings are made of nitrile rubber to ensure that performance of pumps remain the same over a period of time.
• On all bronze impeller are available in stainless steel to provide high abrasion resistance to sand found in borewell.
• All pumps are provided with upthrust bearing to control axial movement of the impeller assembly during transportation as well as start-up.
• Low friction non-return valve is provided on all pumps to reduce water hammer when the pump is stopped.
• All Impellers are individually balanced to G 6.3 of ISO.
• The entire shaft is protected by stainless steel which can be easily replaced when they wear out during maintenance.
• All components are machined using state of the art CNC machines to ensure high dimensional accuracy which gives a longer life to the pump

Product Details:

Features & Benefits:

• Highly energy efficient submersible solar water pump with energy efficient inverter duty motor
• High efficiency solar photovoltaic panels with a service life of minimum 20 years
• Robust design Galvanized steel mounting structure for long life
• High technology automatic controller with dynamic MPPT(rnazirnurn power point tracking) control meth..
• The controller offers complete protection against under and over voltage and dry run protection for the pump
• Highly efficient controller with a conversion efficiency of UP,
• The controller is tropicaled to operate satisfactorily with an ambient temperature up to 50 degree C
• Virtualty no maintenance cost
• Environmentally friendly air and noise pollution free solution

Applications:

• Flood irigation of small fields
• Drip Irrigation for farms
• Cattle watering
• Water supply for small villages, schools, hospitals and homes

Product Details:

Stainless steel submersible Pump are 100% made out of high grade stainless steel they can withstand the harsh abrasive and corrosive environment during its life span. The octagon rubber bearings and built in sand protection shields are designed to ensure that sand is removed from the pump and motor by the water that is being pumped. Submersible pumps made out of materials other than stainless steel can run very well in cold, clean & clear water. However ground water contains abrasives like sand which can quickly wear out both the pump & motor. Lubi has hence designed & developed the J & W series Stainless steel Submersible Pump which made completely out of high grade stainless steel & rubber of premium quality to ensure that the suspended particles do not wear out the pump.

Applications:

• Water supply
• Irrigation
• Civil
• Industrial
• Fire fighting

Features:

 

• Meeting all your water pumping needs
• Material & Design for wear & corrosion resistance
• Minimum cost of ownership
• Low Installation costs
• Application assistance
• Reliable consistent Performance
• Customized pumping solution

Product Details:

Cast Iron submersible Pump are made out of premium quality of raw material to ensure that pump is energy efficient, reliable and has a very long life. All components are manufactured as per international standard. All pumps are equipped with a reliable non- return valve to reduce water hammer & friction losses. Cast Iron Submersible Pumps are available from 4” to 10 “

Applications:

• Water supply
• Irrigation
• Civil
• Industrial
• Fire fighting

Features:

• All pumps have been designed using computational fluid dynamics to ensure maximum efficiency.
• All pumps are designed using material which can work with sand found in the borewell.
• All journal bearing and impeller wear rings are made of nitrile rubber to ensure that performance of pumps remain the same over a period of time.
• On all bronze impeller are available in stainless steel to provide high abrasion resistance to sand found in borewell.
• All pumps are provided with upthrust bearing to control axial movement of the impeller assembly during transportation as well as start-up.
• Low friction non-return valve is provided on all pumps to reduce water hammer when the pump is stopped.
• All Impellers are individually balanced to G 6.3 of ISO .
• The entire shaft is protected by stainless steel which can be easily replaced when they wear out during maintenance.
• All components are machined using state of the art CNC machines to ensure high dimensional accuracy which gives a longer life to the pump.

Product Details:

Lubi guarantees high quality, reliable and cost effective Borewell Pump for your House, Industry and farms. Lubi Pumps with Bronze impellers and complete stainless steel pumps are satisfactorily pumping water from Desserts of Africa and Saudi Arabia to salty water of Indian Ocean.The rotating parts of these Borewell Pump are made using high quality stainless steel

Product Details:

It covers products for drainage and water supply applications as well as centrifugal sewage pumps, tubular casing and vertical immersion pumps, submerged propeller units, submersible borehole pumps, submersible motor pumps and a solid separation system.

Product Details:

Product Details:

Product Details:

Product Details:

 

 

Product Details: